Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Economy Mild Nature-Derived Skin Care Lotion - Happi

Economy Mild Nature-Derived Skin Care Lotion

Economy Mild Nature-Derived Skin Care Lotion
Ingredients
%

0

  • 1. Water [deionized]
  • 90.78
  • 2. Propylene Glycol USP EP (Dow) (Propylene glycol)
  • 2.50
  • 3. CoSept M (HallStar) (Methylparaben)
  • 0.15
  • 4. Carbopol 934 (Noveon) (Carbomer)
  • 0.15
  • 5. Sodium hydroxide NF (20% aqueous) (Sodium hydroxide)
  • 0.32
  • 6. HallStar KLA (HallStar) (Cetearyl alcohol (and) ceteareth-20)
  • 1.50
  • 7. HallStar MM (HallStar) (Myristyl myristate)
  • 1.50
  • 8. HallStar GMS Pure (Hallstar) (Glyceryl stearate)
  • 1.00
  • 9. RTD Stearic Acid V-1655 (Hallstar) (Stearic acid)
  • 2.00
  • 10. CoSept P (Hallstar) (Propylparaben)
  • 0.10

Procedure

(Use strong mixing, without aeration, throughout.) To main vessel add 1. Start mixing and begin heating to 45-50°C. Disperse 3 in 2 with mixing, heating as necessary to achieve solution. When 3 is fully dissolved, slowly add this premix to the main vessel with water at 45-50°C. With rapid but smooth agitation, very slowly add 4 to the main vessel (when an eductor is available, withhold some water for use with the eductor to incorporate 4). Continue heating this water phase to 75-80°C. Meanwhile, in a separate vessel combine 6 through 10 and heat this oil phase to 70-75°C and mix to make uniform and prevent overheating. When the water phase is at 75-80°C, with the carbomer fully dispersed (no “fish eyes”), slowly add 5 to the main vessel, maintaining strong mixing without aeration. After several minutes, when the batch is uniform, slowly add the uniform, 70-75°C, oil phase. Maintain the batch at 75°C for 20 minutes (until a uniformly small particle size emulsion is achieved) and then start cooling. At 45°C add fragrance and approved colorants as desired. Stop cooling and mixing when uniform and at desired filling temperature. Perform final quality assurance checks.

Properties

(25°C, freshly prepared; uncolored and unfragranced)
Appearance: thick, smooth white lotion
Aesthetics: no tack during application or rub-in
Odor: bland and characteristic
pH (10% aq): 6.7
Viscosity (Brookfield  RV, T-D, 5, 10, 50 & 100 rpm; cPs):  64000, 34800, 8920 & 4980
Stability: passed three freeze-thaw cycles and five months at 45°C

More Information

The HallStar Company,  Chicago, IL, (877) 427-4255, (312) 385-4494
Fax: (908) 852-1335, E-mail: customerservice@hallstar.com, Website: www.hallstar.com